1300pcs per hour silicone lipstick filling machine new model in
2025
1.Frame
- Safety cover adopts Aluminum base, surface steel material
Chrome-plated treatment.
- Table covered with SUS, Electric Cabinet and door are SUS.
- Equipped with fixed holding feet. Material loading station can be
removed and carried.
- Euro Standard Aluminum profile column
- Stainless steel door
2. Table Drive System
- Imported Tech of U-shape Circulation Slide Railsystem, 28sets
precision mold for silicone rubber
(anodized processing)
- Station Lifting Controlled by servo index
- Dynamic Part Full Sealed, cooling area has two layer insulation
and sealed.
3. Pre-heating device
- Moulds pre-heating by 2 units Leister heater, blow rate and
heating rate are adjustable.
- Cylinder control the heater’s moving up/down.
- Heater height control by hand wheel
- Heating time control by timer
- Temperature digital display, PID display (with Air Fan, speed
control)
4. Filling machine (1unit)
- Moveable Filler (2 Nozzle), Servo motor to to individual control
each nozzle’s filling volume; 2nd mixing function.
- Two 30L Tank, outer cleaning system.
- Fast-joint Piston pump
- 2nd Nozzle pre-heat, bulk collection function.
- Tank with ceramic heating function, precise control the bulk
temp.
- Adopts electric heating dual layer hose to transfer bulk, change
inner hose when customer change color.
- Servo motor driven piston pump.
- Cylinder control niddle valve’s switch
- AC motor drive the stirrer
- PLC control Electrical system
- Control part compose of touch screen and buttons.
- Power supply is possible from a connector located on the machine
or a separate power connector in the melter storage area.
5. Nozzle moving system
- Air Cylinder control nozzle on/off
- Air Cylinder control nozzle backward/forward
- Heating tube heat the nozzle
- SUS material bulk collect tray
- Air cylinder control the horizontal moving of material.
6. Re-heat Device
- Consists of LEISTER(Import from Switzerland)
- Heater height control by hand wheel
- Temp.setting on touch screen, fan volume adjust manually.
7. Cooling Unit
- Separated water circulation type cooling device.
- Temperature range max -20℃.
- 8Hp compressor
- Digital temperature control and display.
- R404A refrigerant freon gas
- Cooling tunnel installed underneath table.
- Adopt pipeline circulate the cold air.
- Dual layer insulation material outside the cooling tunnel.
8. Discharging Unit
- High Precision Industrial Module control the movement of Y/X
direction and lifting up/down.
- Grasper the container 4pcs.
- Servo Motor control the grasper’s rotating.
- Air Cylinder control the vacuum system’s lifting up/down.
- Two-jaw structure vacuum system to release lipstick out of the
silicone moulds. Grasper is changeable(Self-patent). No need change
vacuum station when the lipstick size within 8mm-17.1mm(diameter).
Grasp tense is adjustable.
- Flexible chain type conveyor to transfer lipstick container mold.
9. Screw Down Unit
- Air cylinder control the grasper’s on/off.
- Servo motor control the grasper’s rotating.
- Torque control the lipstick rotating and falling down.
